Base treatment
(yuan/ton)
Make sure the substrate is strong, flat, and free of hollows. The base surface is clean and free of oil, release agent, floating dust, loose objects and other stains. For highly absorbent base layers, moisten them with clean water.
Technical parameters
, Adhesion performance:
=>
Bonding strength
Compressive shear strength
British Standard
British Standard
Ceramic tiles ~ concrete
, Aging resistance:
Conditions
Days at room temperature
Days after immersion in water
Days after heat and humidity test
Days after freeze-thaw times
Bonding strength
Construction technology
Take out the adhesive powder from the plastic bucket and pour clean cold water into the bucket to the assembly line marked on the bucket body. (The amount of water added per kilogram of bagged binder is approximately . liter)
Pour the binder powder into the bucket and stir with an electric mixer until it is even and free of lumps.
First, use a special scraper to apply a full batch of mortar to the base surface - thick, and then use the toothed side of the scraper to pull out stripes in a straight line or shape (the plane of the scraper and the plane of the base intersect to a degree to degree. It is recommended to adjust the tile according to the Use scrapers with different tooth depths for different sizes).
The tiles do not need to be soaked in water, they just need to be pasted on the wall or floor in order and compacted.
The position of the tiles can be adjusted within the specified time to achieve the best effect. Please remove excess glue before the glue dries.
Applicable environment
Indoor, outdoor, wall, floor, pool, bathroom, kitchen, cold areas.
Notes
Generally, tiles do not need to be soaked in water. For ceramic tiles or base layers with strong water absorption, they should first be soaked in water for a few minutes or sprayed with water to moisten them.
. Heavy load on the ceramic tile surface should be avoided until the initial strength is low to reach the use strength.
The antifreeze type available in winter can be constructed within -℃.
Storage and transportation
The packaging specification of this product is/bag.
. Store in a cool and dry place. During storage and transportation, pay attention to moisture, humidity, and exposure. The storage period is one month.
Tile adhesive adhesive vitrified tile marble mosaic manufacturer direct sale low price