Yuan/ton
High-strength non-shrink grouting material
The grouting material is formulated with high-strength materials as aggregates, cement as binding agent, and high fluidity, micro-expansion, anti-segregation and other substances. It can be used after adding a certain amount of water at the construction site and stirring evenly.
It has the characteristics of good self-flowing properties, fast hardening, early strength, high strength, no shrinkage, micro-expansion, non-toxic, harmless, no aging, no pollution to water quality and surrounding environment, good self-tightness, and anti-rust. In terms of construction, it has the advantages of reliable quality, reduced cost, shortened construction period and easy use. Fundamentally changing the stress situation of the equipment base so that it can evenly bear the entire load of the equipment, thereby meeting the installation requirements of various mechanical and electrical equipment (heavy equipment and high-precision grinders), it is an ideal grouting material in the era of padless installation.
Product Features
. Early strength and high strength: the compressive strength can reach - or above.
.High self-flowing property: can fill all the gaps to meet the secondary grouting requirements of the equipment.
.Micro expansion: ensure close contact between the equipment and the foundation without shrinkage after secondary grouting. The bonding strength is high and the holding strength of the steel bar is no less than that of the steel bar.
.Can be constructed in winter: outdoor construction is allowed at -℃ temperature.
.Strong durability: This product is an inorganic cementing material and its service life is greater than that of the base concrete. After millions of fatigue tests and freeze-thaw cycles, there is no significant change in strength. The strength is significantly improved after soaking in engine oil.
Product usage
. Suitable for basic grouting of machine bases, anchor bolts and other equipment.
.Reinforcement, repair and reinforcement of building beams, slabs, columns, foundations, floors and roads.
.Can be used for anchoring anchor bolts and steel bars and structural reinforcement.
. Embedding and fixing of construction joints using reverse driving method in subways, tunnels, underground and other projects.
. And secondary grouting for fixed connections between steel structures (rails, steel frames, steel columns, etc.) and foundations.
Reference usage
The reference usage calculation is based on .~.tons/cubic meter to calculate the actual usage.
The relationship between mold removal, curing time and ambient temperature
Daily minimum temperature (℃)
Membrane removal time
Curing time
-~
~
~
Construction steps
. Prepare mixing equipment, grouting equipment, formwork and maintenance items, clean the grouting space and wet the concrete surface in advance.
.Support the formwork and seal the joints of the formwork with cement (sand) slurry and plastic tape to ensure no water or slurry leakage.
.Add -% of the grouting material weight with water and stir (mechanical stirring - minutes, manual stirring for more than 1 minute)
.Pour the evenly stirred grouting material into the grouting part from one direction. If necessary, bamboo strips or steel drills can be used to guide the flow, and the template can be properly vibrated or lightly tapped.
.After the construction is completed, the curing agent should be sprayed immediately or covered with plastic film and covered with straw curtains or quilts for one day of moist curing.
.Using temperature is -℃ to ℃. It is strictly prohibited to mix any additives or external additives into the grouting material.
Packaging, storage and transportation
The grouting material is packed in bags and stored in a ventilated and dry place and protected from direct sunlight.
.The shelf life is one month. If the product exceeds the shelf life, it must be re-inspected before it can be used.
DG grouting material manufacturer directly supplies good quality to Shanxi Swinger manufacturer